Text Resize

  • -A
  • +A
  • Your rating: None (9 votes)

    Drilling Safety





    Sometimes it is easier to bring the drill to the workpiece; and other times, the workpiece to the drill press.

    The cordless drill, with its increasing power and go-anywhere convenience, has replaced the corded electric drill in most shops. The impact driver is a new type of handheld drill. Its continuous staccato of tiny impacts allows a small drill to produce hundreds of lbs. of torque without hurting the user or stripping the screw head.

    Drill presses, on the other hand, have remained relatively unchanged, offering controlled plunge action for more precise holes, with an adjustable table for solid workpiece support. Most woodworkers add a larger, auxiliary table and an adjustable fence for repetitive tasks.

    The following is a list of safety precautions to consider when operating a handheld drill or drill press:

    1. Follow the manufacturers' instructions when choosing and a bit or attachment, and selecting the proper speed.

    2. Use eye protection.

    3. Roll up sleeves and tie back long hair.

    4. Ensure that the bit or attachments are properly seated and tightened in the chuck, and before turning on the drill, turn the chuck by hand to see if the bit is running true.

    5. Be sure to remove the chuck key before turning on the drill.

    See how Fine Woodworking's editors rated Drill Presses in the Tool Guide. Compare models and post your own ratings too.
    6. Use sharp drill bits.

    7. Keep all cords clear of the cutting area during use. Inspect for frays or damage before each use.

    8. Use two clamps to secure a workpiece to prevent movement, such as twisting or spinning

    9. Slow the rate of feed just before breaking through the bottom or back of a workpiece.

    10. Do not drill with one hand while holding the material with the other.

    11. Do not use a hole saw cutter without the pilot drill installed in it.

    12. Do not reach under or around stock being drilled.

    13. Do not use excessive force. 


    AsaC